Moderator cover.

[Provider]

Hi All

Can anyone recommend a good moderator cover for a Hardy GenIV mod. I would preferably like one that fits tight and does not require to be cut to size.

What do you use ?

Prov

[ovenpaa]

Tab Covers, Gary at March Scopes UK can usually sort them out.

[saddler]

Bike inner tube would do to protect the finish & provide a minimum level of heat shielding

What sort of cover attributes are you looking for?

[Provider]

Nothing fancy just something that will protect the mod and stop the annoying metallic sound when it hits branches etc.

Thanks ovenpaa I will have a look at the TAB covers.

[Jenks]

Hi All

Can anyone recommend a good moderator cover for a Hardy GenIV mod. I would preferably like one that fits tight and does not require to be cut to size.

What do you use ?

Prov

Prov..

I had a neoprene one for my Blaser Offroad Reflex T8 great for stalking. One day I put the barrel on my LRS2 for a day on the range, never gave a thought to it getting hot. It did first I knew of it was a burning rubber smell. It partially fused itself to the moderator. Which to this day still has bits of rubber stuck to it. I can't remember where I bought mine from, but it was pretty much the same a this one, and a similar price.

http://www.bds.org.uk/BDSESS203

Jenks

[Provider]

Thanks Jenks will have a look.

ATB

Prov

[Blackstuff]

Quite a few available at http://www.bushwear.co.uk/catalogsearch ... ator+cover I've used the Bushmuffler (giggety) ones before and they've done their job. Never managed to burn one either, including when firing over 50 .223 in under a minute

[Provider]

Hi Blackstuff

I use the Bushwear muffler on my T8 but it's a tad too big for the Hardy Gen IV or I would buy another.