Amount needed to reload in order to make my money back?

[ovenpaa]

Not really, this was a combination gauge so it uses the same indicator in two locations. The right hand side with the indicator fitted is measuring the bullet run-out.

I have four types of run-out gauge in the Shed, a SincInt, two types I built myself and one other and I find them invaluable for confirming just how 'straight' my loaded ammunition is. I personally believe a run-out gauge is the second most important tool on the shelf after the basic reloading tools, the first being the OAL gauge.

[Dr. Strangelove]

So, in addition to the RCBS kit (other than dies), I'd need a tumbler, lube of some form, an OAL gauge and a run-out gauge.. And primers and powder!

[Dellboy]

and time

[M99]

So, in addition to the RCBS kit (other than dies), I'd need a tumbler, lube of some form, an OAL gauge and a run-out gauge.. And primers and powder!

A pair of safety glasses!

as many of the reloading manuals as you can get - you can get quite a few now as PDFs

Mike

[honsu]

Hi would the Lee reloading kits from midway uk be a good starting point to start with and replace with betta kit later if I take to reloading?

[Alpha1]

No No No No No dont waste your money.
You do not need to buy every thing at once.
Buy a press the Lee single station cast press should be your first purchase.
Buy a set of Lee dies second purchase
Buy a set of Lee powder scoops. In fact email me your address and I will send you a set but only if you promise to listen to me and not run out and spend huge amounts of money on kit you dont need.
Its late I will re read this post and get back to you what ever you do not rush out and start buying kit.

[ovenpaa]

Agreed, the Cast Classic is a great first press and I have Lee dies set up permanently for a 7,72x51 2.800" build.

Dippers - Well only if you can prove the weight for your choice of powder, then they can be fairly accurate.

[John25]

Dippers are fine as long as you have some decent scales with which to weigh your charges.

Mine were consigned to the 'no longer needed box' within months of becoming a reloader about thirty years ago.

:cheers:

[DOGGER2UK]

I have been using the RCBS rockchucker kit for about 2 years now and,apart from dies,the only addition I have made is a powder trickler.( I own a digital mic which I use for COAL).
One change I want to make to the set up is the plastic powder funnel...I find that due to a static build up in the funnel some powders stick to the sides and dont fall into the case without some prodding.(with NFMP)
I chose the Rcbs kit because it is stronger than my previous lee press.
the rcbs kit has lube and I am still on the origional bottle due mainly to neck sizing.
As you will be loading 303 for your No1 and the Ross it will be necessary to keep the cases from each rifle separate when neck sizing only.Buy some plastic ammo boxes in two colours eg red for the Ross and blue for the No1...this helps to avoid having a live round stuck in the rifle on the firing point and harsh words from the RCO!!
The best tip I can pass on re reloading is Do it Alone (you dont want any distractions) and before you seat a bullet have a look in the case to check for powder!!

[Dr. Strangelove]

I have been using the RCBS rockchucker kit for about 2 years now and,apart from dies,the only addition I have made is a powder trickler.( I own a digital mic which I use for COAL).
One change I want to make to the set up is the plastic powder funnel...I find that due to a static build up in the funnel some powders stick to the sides and dont fall into the case without some prodding.(with NFMP)
I chose the Rcbs kit because it is stronger than my previous lee press.
the rcbs kit has lube and I am still on the origional bottle due mainly to neck sizing.
As you will be loading 303 for your No1 and the Ross it will be necessary to keep the cases from each rifle separate when neck sizing only.Buy some plastic ammo boxes in two colours eg red for the Ross and blue for the No1...this helps to avoid having a live round stuck in the rifle on the firing point and harsh words from the RCO!!
The best tip I can pass on re reloading is Do it Alone (you dont want any distractions) and before you seat a bullet have a look in the case to check for powder!!

Cheers, it sounds like the RCBS kit will do then! Now, to convince my mate he can fit it in his checked in baggage!

Good point regarding keeping loaded rounds separate. I have the fired brass in different bags at the moment but am liable to mix it up!