I have heard lots of negative things said about using Lee 7.5x55 dies for loading 7.5x53.5 Mod 1889 Schmidt-Rubin ammunition.
Just asking, what is the general consensus and recommendations for dies to load this calibre?
ukrifleman
Best F/L sizing die for 7.5x53.5 Schmidt-Rubin?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
ukrifleman
- Full-Bore UK Supporter
- Posts: 757
- Joined: Thu Jun 07, 2012 7:26 pm
- Contact:
Re: Best F/L sizing die for 7.5x53.5 Schmidt-Rubin?
I neck size only after the first fire-form (using Lee dies). In my rifle the case shoulder looks slightly rounded after firing. I do not bother to trim the cases. I shoot cast only in this rifle, so pressures are low.
-
kennyc
- Posts: 2340
- Joined: Wed Jul 20, 2011 11:21 pm
- Home club or Range: hunters NRPC
- Location: Reading West Berks
- Contact:
Re: Best F/L sizing die for 7.5x53.5 Schmidt-Rubin?
I have always used Lee for a k31 as far as I am aware the 1889 shouldn't be an issue the k31 was as it had a much tighter chamber than the G11 and K11 so dies meant for those sometimes caused issues with k31s the 1889 has a totally different bullet shape
Who is online
Users browsing this forum: No registered users and 8 guests