load data
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
dromia
- Site Admin
- Posts: 20228
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: load data
Buy a decent manual like the Lyman that has pressure tested data to use along side manufacturers data.
Internet forum data should never be taken in isolation from good, tested, printed data.
Internet forum data should never be taken in isolation from good, tested, printed data.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
WelshShooter
- Full-Bore UK Supporter
- Posts: 1812
- Joined: Wed Jun 25, 2014 9:45 pm
- Contact:
Re: load data
Here's a link to Alliant load data which was published in 2014, directly from their website. There is a section for .38spl which includes Bullseye data for 125gr Speer GDHP (bottom right of p.77). You can use this as a starting point if you wish, or you can get in touch with Alliant directly and ask whether they have the load data at hand for your needs. As always, use of this load data is at your risk etc.
http://alliantpowder.com/resources/cata ... atalog.pdf
http://alliantpowder.com/resources/cata ... atalog.pdf
-
ballkeeper
Re: load data
guysfound this
125gr lead 1.585 oal
bulleye 5.5 890 fps 6.8max 1158 from lymans 48th reloading handbook
-
dromia
- Site Admin
- Posts: 20228
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: load data
Seems OK, what makes you think it is "hot"?
It is .357" magnum, in a rifle after all.
If you want softer loads then use .38" special data.
It is .357" magnum, in a rifle after all.
If you want softer loads then use .38" special data.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: No registered users and 5 guests