.223 Powder Choice
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: .223 Powder Choice
N140 and H335 was really good with 69gn SMKs. Lighter bullets Benchmark is the way forward. Just tried some of my first loads with Ramshot Tac which is looking promising.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
The Gun Pimp
- Posts: 1154
- Joined: Fri Dec 10, 2010 3:08 pm
- Contact:
Re: .223 Powder Choice
Well, Welsh Shooter - surely the headspace is now 'over' spec and therefore the case vol would theoretically be less after adjustment.
However, as I said, a couple of thou either way ain't going to alter anything much. Even with a competition benchgun it wouldn't worry me.
However, as I said, a couple of thou either way ain't going to alter anything much. Even with a competition benchgun it wouldn't worry me.
-
TattooedGun
- Posts: 2517
- Joined: Mon Jul 11, 2011 11:55 am
- Home club or Range: Dudley Rifle Club, UKPSA, Bromsgrove
- Location: West Midlands
- Contact:
Re: .223 Powder Choice
As is as much as I was hoping to rattle off the rounds I had already loaded to be honest (24). I will use the opportunity as mentioned to change powder for my .223 and come up with a new concoction that's hopefully just as, if not more accurate.
I think it was shooting .7 MOA or so before the work, however I've got a new trigger since which had helped immensely, I just hadn't got it to 100m to check properly! >.<
I think it was shooting .7 MOA or so before the work, however I've got a new trigger since which had helped immensely, I just hadn't got it to 100m to check properly! >.<
Who is online
Users browsing this forum: No registered users and 6 guests