Rcbs chargemaster 1500

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
ColinR

Re: Rcbs chargemaster 1500

#21 Post by ColinR »

ooops posted twice
Last edited by ColinR on Fri Feb 27, 2015 10:42 am, edited 1 time in total.
ColinR

Re: Rcbs chargemaster 1500

#22 Post by ColinR »

three times even....!
rox
Posts: 1900
Joined: Fri Dec 10, 2010 1:33 pm
Contact:

Re: Rcbs chargemaster 1500

#23 Post by rox »

ColinR wrote:How can it be more accurate when the Chargemaster will throw consistent charges time after time?
Have you measured the results using a high quality, calibrated, lab or analytical balance, or are you just saying that it's consistent by its own measurement? (which is done using a fairly cheap strain gauge scale that is working near the limit of the weighing accuracy of that technology).

I often read people saying it's "spot on", but who have no way to more accurately determine what the resulting charge weight is. All that really means is: "it's not malfunctioning"!.

Having said that, when I used one and evaluated it with lab balances the performance was reasonable against the manufacturer's claims (when good measurement techniques and environment controls were in place), albeit rather slow.

..
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Rcbs chargemaster 1500

#24 Post by dromia »

Nothing so sophisticated, the Chargemaster by its own admission sometimes over or underthrows and these get dumped back into the hopper, the Target Master never does this.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
The Gun Pimp
Posts: 1154
Joined: Fri Dec 10, 2010 3:08 pm
Contact:

Re: Rcbs chargemaster 1500

#25 Post by The Gun Pimp »

rox wrote:
ColinR wrote:How can it be more accurate when the Chargemaster will throw consistent charges time after time?
Have you measured the results using a high quality, calibrated, lab or analytical balance, or are you just saying that it's consistent by its own measurement? (which is done using a fairly cheap strain gauge scale that is working near the limit of the weighing accuracy of that technology).

I often read people saying it's "spot on", but who have no way to more accurately determine what the resulting charge weight is. All that really means is: "it's not malfunctioning"!.

Having said that, when I used one and evaluated it with lab balances the performance was reasonable against the manufacturer's claims (when good measurement techniques and environment controls were in place), albeit rather slow.

..
I tend to trust my RCBS Chargemaster for everything except 1000 yard benchrest - where I double check every load on my Denver Instruments MXX123 scales - which weigh to one-fiftieth of a grain. Out of 30 rounds thrown with the Chargemaster, I'll typically adjust two or three by the odd granule of powder.
Countryman

Re: Rcbs chargemaster 1500

#26 Post by Countryman »

Had the Chargemaster a couple of years now. Always been very impressed with it.

What's not to like? If it drank beer and told jokes I would need no other friends.
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Rcbs chargemaster 1500

#27 Post by dromia »

No one is saying the Charge Master isn't a good piece of kit, just saying that there is a better mousetrap out there. The both drop powder accurately enough for shooting purposes and both do the job admirably, just the Target Master does it for less money and is British made, which means something to me at least.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Rcbs chargemaster 1500

#28 Post by Alpha1 »

No one is saying the Charge Master isn't a good piece of kit, just saying that there is a better mousetrap out there. The both drop powder accurately enough for shooting purposes and both do the job admirably, just the Target Master does it for less money and is British made, which means something to me at least.
It means something to me to its one of the reasons I bought one the others are it does the job as well if not better than the charge master. Its cheaper delivery is quick and the guy who makes them is just a phone call away if you need any help. His back up service is second to none. What's not to like.
HALODIN

Re: Rcbs chargemaster 1500

#29 Post by HALODIN »

Personally I'm looking for something that is more accurate than 1/10th grain, if you load your rounds with a powder trickler you can get it to 1/50th grain with certain propellants.
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Rcbs chargemaster 1500

#30 Post by Alpha1 »

Personally I'm looking for something that is more accurate than 1/10th grain, if you load your rounds with a powder trickler you can get it to 1/50th grain with certain propellants.
And does the 1/50th of a grain make a difference down range.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests