Report into Kingsbury Incident

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Maggot

Re: Report into Kingsbury Incident

#61 Post by Maggot »

Mezzer wrote:
DaveB wrote:Sixteen months is a very long time for what is a simple ammunition accident investigation - especially when a club is denied shooting 'rights' throughout the period. And yes - this is a dead-simple investigation. I have done a dozen just like it, and supervised/reviewed the findings of a couple of dozen more.

Even complicated technical investigations that, for example require sending samples off for metallurgical examination, shouldn't take 16 months. The coronial investigations, Courts of Inquiry and so on can easily drag on for months, but the technical side of it - no. Even granting that the NRA may not have full-time ammunition technical experts and armourers on hand, I have to say that if my people took more than a few weeks to investigate a similar incident, I'd be wondering why.
Dave;

I Concur. Like yourself, I am 'in the business'.

If my people required 12 months on such a simple investigation then they would be looking for work elsewhere.
We don't need answers and explanations to the Nth degree. What happened / Where did it happen / Why did it happen and what are we going to do about it is more than enough. The effort and resources required to conduct the investigation should be commensurate with the incident outcome / potential but always with a critical regard to time.
Perhaps the NRA / MoD should consider the formation of a joint national investigation team as previously suggested whose sole function would be to look at firearm incidents such as the Kingsbury event with the objective of establishing immediate / root causes in a timely manner?
I'm not suggesting that the Kingsbury incident hasn't been concluded properly ..... but rather that it took far too long to do so.
Unfortunately, it's a fact of life that incidents can and do happen. Firearm-related incidents will always attract more attention and by dealing with these events in a professional, transparent and timely manner it can only enhance the credibility of the shooting fraternity.

My thoughts and opinion only (based on 25 years experience in the H&S game)

Mezzer
OK Mezzer, fair one mate.
Maggot

Re: Report into Kingsbury Incident

#62 Post by Maggot »

targetman wrote:Karen.....just accept that there is a lot of anti NRA types on this forum....best ignore them and not rise to their purile jibes.....
Nothing wrong with having a go at the NRA as long as it is fair and you have the guts to accept that you may well have been wrong. Should really be a member first, but unless enough people bitch when they think something is genuinely wrong or unfair, nothing would progress would it?

As far as TR is concerned however....you're fair game..... :grin: Just keep a GSOH :lol:

If I was in Karen's shoes (interesting thought) and someone had a go at my missus, I would defend her (even if she was in the wrong...which as a woman is never...right lads :twisted: )
User avatar
DaveB
Posts: 1594
Joined: Thu Dec 05, 2013 7:11 am
Home club or Range: Wellington Service Rifle Assocaition; NZ Deerstalkers Association; Wairarapa Pistol & Shooting Sports Club
Location: Upper Hutt, New Zealand
Contact:

Re: Report into Kingsbury Incident

#63 Post by DaveB »

karen wrote:
DaveB wrote:Sixteen months is a very long time for what is a simple ammunition accident investigation
Er sixteen months? Have you read the report?

It happened in July 2013!
OK, my error. I was sure one of the comments somewhere mentioned 16 months (and just going beck through the thread it isn't there so I don't know where the heck I got that figure from) at any rate I thought I saw it somewhere - seized on that and didn't go back and verify the actual date of the incident, which I should have done.

I am not having a go at anybody here, just wondering why it took so long.
Steve E

Re: Report into Kingsbury Incident

#64 Post by Steve E »

The investigation probably took so long because some of the people involved may have been less than helpfull or obstructive to the investigation.
User avatar
Sim G
Posts: 10752
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

Re: Report into Kingsbury Incident

#65 Post by Sim G »

May have been, or were....?

Personally, I believe that the cause of the incident will never be known and because of that, the possible cause highlighted has been over egged against Mr D.

Only very recently we've had a thread on here where a potentially catastrophic fault was found to have developed in a surplus rifle. Thankfully discovered before use. Nothing, IMO, indicates that Mr D was the "likely" cause. On the contrary, the evidence collected indicates to the contrary...

Imagine having to ban all SMLE's from the ranges....?
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests