Report into Kingsbury Incident
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Report into Kingsbury Incident
http://www.nra.org.uk/common/asp/conten ... RA&id=1493
Most likely cause was incorrectly loaded home load.
Most likely cause was incorrectly loaded home load.
Re: Report into Kingsbury Incident
Bit of an eye opener that 1 incorrectly loaded round of ammunition can result in the whole club being banned from using MoD ranges for a year.
Certainly makes you think.
Certainly makes you think.
Re: Report into Kingsbury Incident
Excellent to see the relevant excerpts from the report published. Top marks to the NRA for promoting transparency.
Re: Report into Kingsbury Incident
Yep, thanks John, but harping back to the "Mercer an NRA against reloading" thread, how were you made aware of this report mate?Gaz wrote:Excellent to see the relevant excerpts from the report published. Top marks to the NRA for promoting transparency.
As an RO its about time we, or better still ALL members were sent this report. :cool2:
Well done in getting a heads up though anyway.
Re: Report into Kingsbury Incident
It was posted on the NRA Website today.Maggot wrote: how were you made aware of this report mate?
Re: Report into Kingsbury Incident
Yes in light of recent discussions about the NRA and reloading, the report answers a lot of criticisms...while it appears that we will have to wait up to a year for the publication of incident reports, if all future incidents are investigated and reported in this way then I don't think we have anything to worry about...and it's good to see the MOD allowing the NRA and club involved to resolve the matter themselves.Gaz wrote:Excellent to see the relevant excerpts from the report published. Top marks to the NRA for promoting transparency.
Re: Report into Kingsbury Incident
OK mate, I will have a look, see how easy it was to find.John MH wrote:It was posted on the NRA Website today.Maggot wrote: how were you made aware of this report mate?
Thanks again.
Re: Report into Kingsbury Incident
OK, great.John MH wrote:It was posted on the NRA Website today.Maggot wrote: how were you made aware of this report mate?
I still feel it needs it own section (Safety bulletins). In fairness I probably need to pay more attention to the website John

One an even more positive note I see they are running a markers shoot on the 7th. Shame its on the date and time it is or I would have marked, but good to see anyway. It would be nice to meet some of the markers (and throttle a couple

No...No....the voices again.....

Well done NRA

-
- Posts: 1424
- Joined: Tue Feb 22, 2011 12:43 pm
- Home club or Range: NRA Bisley
- Location: Bisley
- Contact:
Re: Report into Kingsbury Incident
A safety section is on list of desirables, there is a lot of thought going into the website at the moment, action will follow, not sure when.
Iain
Iain
Re: Report into Kingsbury Incident
From what I understood of proof charges, would a 25% overload cause that sort of catastrophic failure? I thought proof loads were way, way more than that? Although I suppose that would vary for each calibre? Do the proof house publish the specs of their proof loads anywhere?
Interesting point re mixed powder; perhaps unlikely in the middle of a batch (perhaps not so if it was the first round of slow after the equipment had been used for fast?) but a timely reminder to those of us that load both slow and fast powders (into different calibres) to make extra sure the kit is clean of one before starting the other.
Interesting point re mixed powder; perhaps unlikely in the middle of a batch (perhaps not so if it was the first round of slow after the equipment had been used for fast?) but a timely reminder to those of us that load both slow and fast powders (into different calibres) to make extra sure the kit is clean of one before starting the other.
Who is online
Users browsing this forum: No registered users and 4 guests