I will be after some of these when my FAC gets here (hopefully in 6 weeks!). Where is a good place to get them from, and what sort of cost are we talking? It will be for an Armscor muzzle loading revolver.
I will eventually cast my own, but initially I want to buy in a load of them.
.357" 148gr Wadcutter bullets
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: .357" 148gr Wadcutter bullets
Get them from Dodgyrog right here on FBUK.
It's not the pace of life that concerns me, it's the sudden stop at the end!
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: .357" 148gr Wadcutter bullets
Got it and now know what they're for. Reply sent.
ATB
ATB
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
Gun Pimp
Re: .357" 148gr Wadcutter bullets
When I tried wadcutters they were very accurate in the Armscor but not sure if the forcing-cone is profiled for full wadcutters. Might be best to use a round-nose if you're just plinking. Try a few different bullets before you 'buy in a load of them'.techguy wrote:I will be after some of these when my FAC gets here (hopefully in 6 weeks!). Where is a good place to get them from, and what sort of cost are we talking? It will be for an Armscor muzzle loading revolver.
I will eventually cast my own, but initially I want to buy in a load of them.
Vince
Who is online
Users browsing this forum: Google [Bot] and 4 guests