6mm br lapua cases
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
6mm br lapua cases
I all, does anybody know of a shop that has any 6mm br lapua cases in stock in the old brown cardboard box in stock?
Regards
Essexboy
Regards
Essexboy
- dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: 6mm br lapua cases
Try Hannams Reloading
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
Re: 6mm br lapua cases
essexboy wrote:I all, does anybody know of a shop that has any 6mm br lapua cases in stock in the old brown cardboard box in stock?
Regards
Essexboy
why the cardboard?
what lot number are you after i may be able to help you
Re: 6mm br lapua cases
why the cardboard?
The cardboard box cases have a thicker neck, lapua reduced the neck thickness by about a thou to bring the cases more in line with C.I.P specs, my chamber has a .272 neck my loaded rounds are .270 a nice snug fit, that extra thou and it starts to get a bit baggy.
Essexboy
The cardboard box cases have a thicker neck, lapua reduced the neck thickness by about a thou to bring the cases more in line with C.I.P specs, my chamber has a .272 neck my loaded rounds are .270 a nice snug fit, that extra thou and it starts to get a bit baggy.
Essexboy
Re: 6mm br lapua cases
At over 65 quid for the new blue box stuff they are not cheap either.
Re: 6mm br lapua cases
what are the carbboard 6mmbr neck walls thickness ill double check these ones i have here
Re: 6mm br lapua cases
ovenpaa wrote:At over 65 quid for the new blue box stuff they are not cheap either.
NOTHING IS NOW DAYS dAVE!!!
Re: 6mm br lapua cases
what are the carbboard 6mmbr neck walls thickness ill double check these ones i have here
Off the top of my head the old box are 13thou the blue box are 12.5 thou
Essexboy
Off the top of my head the old box are 13thou the blue box are 12.5 thou
Essexboy
Re: 6mm br lapua cases
ON MY SET OF MIYATUTOS I HAVE A BOX OF NEW BLUE CASES HERE GOING 13.5-14 THOU
Who is online
Users browsing this forum: Google [Bot] and 6 guests