Page 1 of 1
6br loads
Posted: Fri Jun 01, 2012 4:03 pm
by 223ackley
What are the favourate loads of you 6BR shooters out there just got all my reloading gear finaly sorted at last so any info appreciated
Re: 6br loads
Posted: Fri Jun 01, 2012 4:15 pm
by spud
what twist is your barrel?, what type of shooting are you doing?, Are you single feeding or magazine?
all make a difference to the awnser
Re: 6br loads
Posted: Fri Jun 01, 2012 4:41 pm
by 223ackley
the rifle is a valkyrie rifle with a 1 in 8 kreiger barrel built into a aics stock with a five shot mag, it is going to be used for foxes but mostley long range varminting and target shooting i have a tub of varget and a selection of bullets 10 of each 68grBarts /70gr smk /70gr nosler b/t /87 gr hornada b,t,h,p / 105 gr berger vld & 107gr smk using lapua brass
Re: 6br loads
Posted: Fri Jun 01, 2012 7:23 pm
by 1066
The load I'm using for my 6br with 1in8 Shilen barrel is 29.6gn Varget with 108gn Berger - It's a single shot Savage action and I load them out to the lands.
Re: 6br loads
Posted: Fri Jun 01, 2012 7:28 pm
by 223ackley
1066 wrote:The load I'm using for my 6br with 1in8 Shilen barrel is 29.6gn Varget with 108gn Berger - It's a single shot Savage action and I load them out to the lands.
what primers are you using
Re: 6br loads
Posted: Fri Jun 01, 2012 9:18 pm
by 1066
223ackley wrote:1066 wrote:The load I'm using for my 6br with 1in8 Shilen barrel is 29.6gn Varget with 108gn Berger - It's a single shot Savage action and I load them out to the lands.
what primers are you using
I'm using cci BR4's with lapua cases giving about 2875fps.
I see I have also had good results with the 69gn FB Berger's with 29.8gns Varget jumped 10 thou.
