6br loads
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
spud
Re: 6br loads
what twist is your barrel?, what type of shooting are you doing?, Are you single feeding or magazine?
all make a difference to the awnser
all make a difference to the awnser
-
223ackley
Re: 6br loads
the rifle is a valkyrie rifle with a 1 in 8 kreiger barrel built into a aics stock with a five shot mag, it is going to be used for foxes but mostley long range varminting and target shooting i have a tub of varget and a selection of bullets 10 of each 68grBarts /70gr smk /70gr nosler b/t /87 gr hornada b,t,h,p / 105 gr berger vld & 107gr smk using lapua brass
Re: 6br loads
The load I'm using for my 6br with 1in8 Shilen barrel is 29.6gn Varget with 108gn Berger - It's a single shot Savage action and I load them out to the lands.
-
223ackley
Re: 6br loads
1066 wrote:The load I'm using for my 6br with 1in8 Shilen barrel is 29.6gn Varget with 108gn Berger - It's a single shot Savage action and I load them out to the lands.
what primers are you using
Re: 6br loads
I'm using cci BR4's with lapua cases giving about 2875fps.223ackley wrote:1066 wrote:The load I'm using for my 6br with 1in8 Shilen barrel is 29.6gn Varget with 108gn Berger - It's a single shot Savage action and I load them out to the lands.
what primers are you using
I see I have also had good results with the 69gn FB Berger's with 29.8gns Varget jumped 10 thou.
Who is online
Users browsing this forum: No registered users and 5 guests