The Belding and Mull is back!
Posted: Mon Apr 09, 2012 6:33 pm
The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.
All people seeking membership must contact admin after registering to be validated.
https://www.full-bore.co.uk/
The Belding and Mull is back!
Page 1 of 1
Re: The Belding and Mull is back!
Posted: Mon Apr 09, 2012 7:18 pm
Well priced as well 
Re: The Belding and Mull is back!
Posted: Mon Apr 09, 2012 8:31 pm
Can't see a price listed?
There's an "updated" version by MVA, http://www.montanavintagearms.com/reloading.html
There's an "updated" version by MVA, http://www.montanavintagearms.com/reloading.html
Re: The Belding and Mull is back!
Posted: Tue Apr 10, 2012 4:24 am
Yep but their parts don't fit the original Belding and Mull Measures. 
Re: The Belding and Mull is back!
Posted: Tue Apr 10, 2012 4:28 am
Only the charge tubes are priced so far, the dispensers aren't.
The charge tubes are available May, I've ordered a couple of micro adjusts for my original B&Ms.
The dispensers are due late summer.
The charge tubes are available May, I've ordered a couple of micro adjusts for my original B&Ms.
The dispensers are due late summer.
Re: The Belding and Mull is back!
Posted: Tue Apr 10, 2012 7:33 am
Tell us more about this mysterious device.
Re: The Belding and Mull is back!
Posted: Tue Apr 10, 2012 7:58 am
The bees knees of powder dispensers. Especially a favourite with BPCR handloaders however the sliding non cutting action makes it a very accurate dispenser for smokeless powders too.
An old design that was out of production for a long time. MVA made their version of it but it is expensive, be interesting to see the B&M prices.
For those of us that cherish these dispensers and have bought and treasured old ones and bits of old ones the ability to get parts is a god send. Also Belding and Mull is an old handloading company and did some fine boolit moulds amongst other things.
Guns handloading and shooting always seems to get better when it goes backwards.
An old design that was out of production for a long time. MVA made their version of it but it is expensive, be interesting to see the B&M prices.
For those of us that cherish these dispensers and have bought and treasured old ones and bits of old ones the ability to get parts is a god send. Also Belding and Mull is an old handloading company and did some fine boolit moulds amongst other things.
Guns handloading and shooting always seems to get better when it goes backwards.