Huzzah!!!!
http://www.beldingandmull.com/products.html
The Belding and Mull is back!
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
dromia
- Site Admin
- Posts: 20224
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
The Belding and Mull is back!
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: The Belding and Mull is back!
Well priced as well 
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: The Belding and Mull is back!
Can't see a price listed?
There's an "updated" version by MVA, http://www.montanavintagearms.com/reloading.html
There's an "updated" version by MVA, http://www.montanavintagearms.com/reloading.html
There's room for all Gods creatures, next to the mash and gravy :)
-
dromia
- Site Admin
- Posts: 20224
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: The Belding and Mull is back!
Yep but their parts don't fit the original Belding and Mull Measures. 
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
dromia
- Site Admin
- Posts: 20224
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: The Belding and Mull is back!
Only the charge tubes are priced so far, the dispensers aren't.
The charge tubes are available May, I've ordered a couple of micro adjusts for my original B&Ms.
The dispensers are due late summer.
The charge tubes are available May, I've ordered a couple of micro adjusts for my original B&Ms.
The dispensers are due late summer.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: The Belding and Mull is back!
Tell us more about this mysterious device.
It's not the pace of life that concerns me, it's the sudden stop at the end!
-
dromia
- Site Admin
- Posts: 20224
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: The Belding and Mull is back!
The bees knees of powder dispensers. Especially a favourite with BPCR handloaders however the sliding non cutting action makes it a very accurate dispenser for smokeless powders too.
An old design that was out of production for a long time. MVA made their version of it but it is expensive, be interesting to see the B&M prices.
For those of us that cherish these dispensers and have bought and treasured old ones and bits of old ones the ability to get parts is a god send. Also Belding and Mull is an old handloading company and did some fine boolit moulds amongst other things.
Guns handloading and shooting always seems to get better when it goes backwards.
An old design that was out of production for a long time. MVA made their version of it but it is expensive, be interesting to see the B&M prices.
For those of us that cherish these dispensers and have bought and treasured old ones and bits of old ones the ability to get parts is a god send. Also Belding and Mull is an old handloading company and did some fine boolit moulds amongst other things.
Guns handloading and shooting always seems to get better when it goes backwards.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: No registered users and 8 guests