Is the annealing machine working at this time?
Sincerely
Filippo
Annealing machine
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Annealing machine
Hey Filippo!
I assume you mean mine? I have replaced the rotating station drive with a 60RPM unit and fitted the original rotating station gearbox to the main drive. Machined some motor covers to make it look nice and it is running. I will add a rubber cushion to the rotator to give better contact with the cases and that is the job done.
I had to assist in decorating the bathroom this week or the annealing machine would have been finished by now, the plan is to finish it off Monday.
I assume you mean mine? I have replaced the rotating station drive with a 60RPM unit and fitted the original rotating station gearbox to the main drive. Machined some motor covers to make it look nice and it is running. I will add a rubber cushion to the rotator to give better contact with the cases and that is the job done.
I had to assist in decorating the bathroom this week or the annealing machine would have been finished by now, the plan is to finish it off Monday.
-
FilippoMo
Re: Annealing machine
Sure I was thinking about your machine,I wonder if you would provide me with material list and plan
I would like to make one for my own use.
Sincerely
Filippo
I would like to make one for my own use.
Sincerely
Filippo
Re: Annealing machine
Yes I can do that, I will have to make a list as I have not kept a record of all of the materials and some parts were built to suit but I can certainly take photographs so you get the idea. Would you build it yourself?
-
FilippoMo
Re: Annealing machine
Yes I might get some help from my friends if needed
thank you
Filippo
thank you
Filippo
Who is online
Users browsing this forum: No registered users and 6 guests