This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Could anybody with Quickload (or similar) do me a favour?
I'm researching 303/25 loading data and I want to see what Quickload comes up with. Then compare it with the data my load calculator has come up with, as well the (scant) published loads I have.
If anyone can help that would be great, just let me know what details you need.
Cheers.
“The standard you walk past is the standard you accept.”
I have QL, just give me as much data as you can, powder choice, bullet weight OAL and anything else you can and I will see how close I can get to the 25-303
/d
Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...
dromia wrote:Quickload doesn't list the 25/303 its considred a wildcat cartridge methinks. Another 25 of similar case capacity would give a starting point though.
I understand now - I thought you could you could, in a sense, design a cartridge using Quickload.
ovenpaa wrote:I have QL, just give me as much data as you can, powder choice, bullet weight OAL and anything else you can and I will see how close I can get to the 25-303
I'll PM you the details, 257 Roberts will be a good starting point.
“The standard you walk past is the standard you accept.”
