Jamison Brass is closing.

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
dromia
Site Admin
Posts: 20222
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Jamison Brass is closing.

#1 Post by dromia »

What goes around comes around.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Jamison Brass is closing.

#2 Post by ovenpaa »

Hmm... I was looking at them just the other day as well.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
User avatar
dromia
Site Admin
Posts: 20222
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Jamison Brass is closing.

#3 Post by dromia »

Well you been saved from their rubbish.

They are a bunch of shysters. I was in on a very large group buy from them a couple of years ago for .577" Snider and .577"/.450" Martini brass, I'd about £250 sunk in it. The stuff they sent was absolute crap, off centre on the base and sundry other issues. Most wouldn't chamber in any rifle. The off centre base meant that there was a step on one side of the case when you resized, utter rubbish and unuseable.

OK stuff happens, but when we asked for them to sort it we were basically told to p**s of.

Over a year later there was a new PR person who tried to put things right but by that time most of us had weighed the brass in for scrap.

With an attitude like that I'm not surprised they are going under.

No doubt it will be the poor sods on the factory floor that will get the pain though, with lost jobs and wages unpaid.

Good riddance to bad rubbish I say, the ones at the top they deserve all they get.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests