Hi all,
Am I right in thinking the above will fit a 300norma mag case
Tia
Al,
#8 shell holder
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
stottycake
- Posts: 286
- Joined: Sun Mar 24, 2013 9:10 pm
- Home club or Range: Tcsc,.gardners guns,
- Contact:
-
phaedra1106
- Posts: 3428
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: #8 shell holder
Redding #35 is the one to go for, the Lee can cause problems from what I've found on the net.
There's room for all Gods creatures, next to the mash and gravy :)
-
stottycake
- Posts: 286
- Joined: Sun Mar 24, 2013 9:10 pm
- Home club or Range: Tcsc,.gardners guns,
- Contact:
Re: #8 shell holder
Cheers jeff,phaedra1106 wrote:Redding #35 is the one to go for, the Lee can cause problems from what I've found on the net.
Who is online
Users browsing this forum: Bing [Bot] and 7 guests