310 cadet bootlits
Posted: Mon Jun 24, 2019 3:47 pm
What’s a good starting point for lead alloy for casting ie lead, tin, antimony for 310 cadet?
The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.
All people seeking membership must contact admin after registering to be validated.
https://www.full-bore.co.uk/
310 cadet bootlits
Page 1 of 2
Re: 310 cadet bootlits
Posted: Mon Jun 24, 2019 3:59 pm
range scrap is fine
Re: 310 cadet bootlits
Posted: Mon Jun 24, 2019 4:07 pm
I better ask GG nicely if I can get some 
Re: 310 cadet bootlits
Posted: Mon Jun 24, 2019 4:07 pm
I am sure the price will be right!
Re: 310 cadet bootlits
Posted: Mon Jun 24, 2019 4:18 pm
So range scrap might be a possibility but I do have several kg’s of lead I could also use if I can
Re: 310 cadet bootlits
Posted: Mon Jun 24, 2019 4:22 pm
25:1 lead / tin.
Fred
Fred
Re: 310 cadet bootlits
Posted: Mon Jun 24, 2019 5:19 pm
Any ideas on sourcing the tin?
Re: 310 cadet bootlits
Posted: Mon Jun 24, 2019 5:46 pm
eBay. Pewter tankard.
Re: 310 cadet bootlits
Posted: Mon Jun 24, 2019 6:30 pm
Plumbers bar solder.
Re: 310 cadet bootlits
Posted: Fri Jun 28, 2019 7:25 am
Lead free solder for the tin.
You only need a little tin to help with fill out, I use an inch of solder to 1lb of lead, you do not in any way want hard bullets.
Avoid any antimony like the plague.
You only need a little tin to help with fill out, I use an inch of solder to 1lb of lead, you do not in any way want hard bullets.
Avoid any antimony like the plague.