310 cadet bootlits
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Keithkilvo1
- Posts: 277
- Joined: Thu Sep 21, 2017 11:36 am
- Home club or Range: ARPC
- Contact:
310 cadet bootlits
What’s a good starting point for lead alloy for casting ie lead, tin, antimony for 310 cadet?
-
mag41uk
- Posts: 1847
- Joined: Sat Oct 13, 2012 3:50 pm
- Home club or Range: Aldershot R & P Club
- Location: Reading
- Contact:
Re: 310 cadet bootlits
range scrap is fine
-
Keithkilvo1
- Posts: 277
- Joined: Thu Sep 21, 2017 11:36 am
- Home club or Range: ARPC
- Contact:
Re: 310 cadet bootlits
I better ask GG nicely if I can get some 
-
mag41uk
- Posts: 1847
- Joined: Sat Oct 13, 2012 3:50 pm
- Home club or Range: Aldershot R & P Club
- Location: Reading
- Contact:
Re: 310 cadet bootlits
I am sure the price will be right!
-
Keithkilvo1
- Posts: 277
- Joined: Thu Sep 21, 2017 11:36 am
- Home club or Range: ARPC
- Contact:
Re: 310 cadet bootlits
So range scrap might be a possibility but I do have several kg’s of lead I could also use if I can
-
FredB
- Posts: 969
- Joined: Fri Dec 10, 2010 8:33 pm
- Home club or Range: stourport
- Location: Wolverhampton
- Contact:
Re: 310 cadet bootlits
25:1 lead / tin.
Fred
Fred
-
Keithkilvo1
- Posts: 277
- Joined: Thu Sep 21, 2017 11:36 am
- Home club or Range: ARPC
- Contact:
Re: 310 cadet bootlits
Any ideas on sourcing the tin?
Re: 310 cadet bootlits
eBay. Pewter tankard.
Re: 310 cadet bootlits
Plumbers bar solder.
-
dromia
- Site Admin
- Posts: 20230
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: 310 cadet bootlits
Lead free solder for the tin.
You only need a little tin to help with fill out, I use an inch of solder to 1lb of lead, you do not in any way want hard bullets.
Avoid any antimony like the plague.
You only need a little tin to help with fill out, I use an inch of solder to 1lb of lead, you do not in any way want hard bullets.
Avoid any antimony like the plague.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: Majestic-12 [Bot] and 4 guests