I need:
ogive length
Rt/R ratio
Meplat diamater
Boat tail length
Boat tail angle in degrees.
Cheers
Litz 180 Berger Hybrid data needed
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Litz 180 Berger Hybrid data needed
I only have the first edition of the Litz book and it does not include the .284 Berger 180 Hybrid and I am after some data for a new app I am looking at, so if someone has the book it would be handy
I need:
ogive length
Rt/R ratio
Meplat diamater
Boat tail length
Boat tail angle in degrees.
Cheers
I need:
ogive length
Rt/R ratio
Meplat diamater
Boat tail length
Boat tail angle in degrees.
Cheers
Re: Litz 180 Berger Hybrid data needed
Perfect and many thanks DM :goodjob:
-
Dangermouse
Re: Litz 180 Berger Hybrid data needed
I still have not read this edition and can not remember him saying why he includes figures up to 3000fps for all his samples. Surely he does not take each load up that high? For some he would be in the danger zone if not way past it,
DM
DM
Re: Litz 180 Berger Hybrid data needed
Are they theoretical figures maybe? The G7 will vary at given velocities and is readily calculated.
I have read the first edition a couple of times now but not got around to getting the second edition yet, I might just hang on for the next edition instead.
I have read the first edition a couple of times now but not got around to getting the second edition yet, I might just hang on for the next edition instead.
Who is online
Users browsing this forum: No registered users and 8 guests