6.5x55 reloading
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
6.5x55 reloading
Hi all,
got my Carl Gustav Swedish mauser today and well pleased.
Anyone have a good load for the 6.5x55 with PPU 139gr heads and Vit N140
any advice greatly ppreciated
Also I havent any experience with the rear sights and i take it the 200 yard mark is with the sight lying flat
regards
douglas
got my Carl Gustav Swedish mauser today and well pleased.
Anyone have a good load for the 6.5x55 with PPU 139gr heads and Vit N140
any advice greatly ppreciated
Also I havent any experience with the rear sights and i take it the 200 yard mark is with the sight lying flat
regards
douglas
- dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: 6.5x55 reloading
Use Viht 160 not 140.
http://www.lapua.com/en/products/reload ... odata/5/56
http://www.lapua.com/en/products/reload ... odata/5/56
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
- Site Admin
- Posts: 17528
- Joined: Fri Nov 05, 2010 7:52 pm
- Location: Wind Swept Denmark
- Contact:
Re: 6.5x55 reloading
No picture? Broken camera?
:-P
:-P
-
- Site Admin
- Posts: 17528
- Joined: Fri Nov 05, 2010 7:52 pm
- Location: Wind Swept Denmark
- Contact:
Re: 6.5x55 reloading
Thank you!
:goodjob:
On here no fotografía, no comprende!
:goodjob:
On here no fotografía, no comprende!
Re: 6.5x55 reloading
heres the rest of the motley crew
the Finish Nagant and other nagant sniper is on here somewhere
certainly the nagant was in the forsale section (not the finnish one before you all ask, its being kept)lol
nothing else forsale meantime but i guess everything has its price??
douglas
the Finish Nagant and other nagant sniper is on here somewhere
certainly the nagant was in the forsale section (not the finnish one before you all ask, its being kept)lol
nothing else forsale meantime but i guess everything has its price??
douglas
Re: 6.5x55 reloading
I have not seen a blonde Swede before (OK I have seen a few but they were usually called Ulla or Gota or Pia)
Very nice rifles Douglas, how do they shoot?
Very nice rifles Douglas, how do they shoot?
Re: 6.5x55 reloading
they all shoot very well,
still to shoot the swedish one as i am told to try Vit N160, i only have N140 at the moment, and my usual dealer doesnt stock the N160.
will get there though in the end
regards
douglas
still to shoot the swedish one as i am told to try Vit N160, i only have N140 at the moment, and my usual dealer doesnt stock the N160.
will get there though in the end
regards
douglas
Who is online
Users browsing this forum: simong and 7 guests