Annealeez machine

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
Gerry939

Annealeez machine

#1 Post by Gerry939 »

Does anyone have an annealeez machine or know where I can get one , or any other annealing machine, and no I can't make one..LOL, and what are the other types of annealing pro's/ con's, any info please, Gerry
:flag6: :flag13:
Top
User avatar
phaedra1106
Posts: 3429
Joined: Wed Feb 08, 2012 9:37 pm
Location: Just outside Sacriston (the nice bit!)
Contact:
Contact phaedra1106

Re: Annealeez machine

#2 Post by phaedra1106 »

Have chat with Lubo (Raptor Calls) on UKV, he makes a very nice one,

http://ukvarminting.com/forums/topic/32 ... g-machine/

Or he has a FaceAche page as well :)

https://www.facebook.com/raptorvarminting/
There's room for all Gods creatures, next to the mash and gravy :)
Top
Gerry939

Re: Annealeez machine

#3 Post by Gerry939 »

Thanks for that opened up a new line of interest ...
Top
Gazza

Re: Annealeez machine

#4 Post by Gazza »

Induction heating is the way to go not gas :good:
Top
Gerry939

Re: Annealeez machine

#5 Post by Gerry939 »

Thanks Phaedra
Ive just ordered an annealing Machine
And torch & Gas just need to get some good instructions and away i go.
:flag6: :flag13: fingerscrossed
Top
User avatar
phaedra1106
Posts: 3429
Joined: Wed Feb 08, 2012 9:37 pm
Location: Just outside Sacriston (the nice bit!)
Contact:
Contact phaedra1106

Re: Annealeez machine

#6 Post by phaedra1106 »

Buy some Tempilaq, 650f for just below the shoulder or 750f for inside the neck (more difficult to see).

Don't do it in the dark waiting for the case necks to "just glow cherry red" (as is often suggested on the net) as that's a great way to bugger your cases.
There's room for all Gods creatures, next to the mash and gravy :)
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: Google [Bot] and 8 guests