For all you 6.5 Creedmoor junkies, Lapua are now producing brass for this calibre due for release in Q1 FY17.
http://www.lapua.com/en/headlines/335/6 ... is-here%21
However, Lapua have stated that the case they offer will require a small rifle primer as opposed to the large rifle primer. Bear this in mind! No discussion on price, but I'm guessing it can't be higher than 6.5x47 which retail for £110 per hundred in the UK (there or there abouts).
This should also make it more available for UK reloaders who currently have to rely on Hornady shipments from the US, which aren't much cheaper than the aforementioned price.
6.5 Creedmoor Brass Now Being Made by Lapua!
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
WelshShooter
- Full-Bore UK Supporter
- Posts: 1812
- Joined: Wed Jun 25, 2014 9:45 pm
- Contact:
-
tackb
Re: 6.5 Creedmoor Brass Now Being Made by Lapua!
ooh , a little bit of wee came out I'm so excited !
Who is online
Users browsing this forum: No registered users and 4 guests