Reloading cast bullets for the 8x57 IS
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Reloading cast bullets for the 8x57 IS
I am going to order some cast bullets for my 8x57 Mauser for 25-100m stuff, can anyone recommend a good weight to start with, I have been shooting 198 and 200 grain jacketed so far however I would now like to try cast.
-
dromia
- Site Admin
- Posts: 20227
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Reloading cast bullets for the 8x57 IS
No lighter than 200 gn, 230 gns work well for me. For the longer distances that is with fast rifle powders,
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
saddler
Re: Reloading cast bullets for the 8x57 IS
Slugged the bore?
Lots of pistol cal bullets make good short range rifle bullets.
.32 in .308/7.62, etc.
Lots of pistol cal bullets make good short range rifle bullets.
.32 in .308/7.62, etc.
Re: Reloading cast bullets for the 8x57 IS
Not slugged it yet, nor taken a chamber impression, I am more interested in weight and profile at this stage.
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: Reloading cast bullets for the 8x57 IS
PM sent
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
ukrifleman
- Full-Bore UK Supporter
- Posts: 757
- Joined: Thu Jun 07, 2012 7:26 pm
- Contact:
Re: Reloading cast bullets for the 8x57 IS
I have had good results with the Lee .329, 205gn 8x56 Hungarian bullet (mould No.90775) and gas checked down to .325, in both my K98 and Gew98 out to 300 yards.
ukrifleman.
ukrifleman.
-
pe4king
- Posts: 1402
- Joined: Sat Nov 06, 2010 9:59 pm
- Home club or Range: Lydd Rifle Club.
- Location: Rainham, Kent.
- Contact:
Re: Reloading cast bullets for the 8x57 IS
I had some 240gr gas checked bullets I got from here (20 series I think) they shot great with 30gr of N140, if I could get some more I would.
What is a Sapper? This versatile genius condenses the whole system of military engineering and all that is useful and practical. He is a man of all work of the Army and the public ready to do anything or go anywhere, in short, he is a Sapper.
Who is online
Users browsing this forum: No registered users and 4 guests