.223 reloading

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
ellmerfudd

.223 reloading

#1 Post by ellmerfudd »

Good afternoon everyone, does anyone know what/tried the PPU bullets and know what they are like for accuracy at 100yds or out further cheers my rifle used to shoot good groups at 100 with factory 69 and 75gr but just wondered if they were worth trying as compared to SMK
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests