174 grain flat base .311 bullets wanted
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
174 grain flat base .311 bullets wanted
Any one know were I can purchase 174grain flat base .311 bullets.
-
River
Re: 174 grain flat base .311 bullets wanted
Nope, the PPU bullets of this spec are boat tail!Ovenpaa wrote:Kranks?
Re: 174 grain flat base .311 bullets wanted
I was given a few hundred for my .303's by a neighbour a while ago however he never actually said where they came from, only that he was going back to the SMK 174's. The ones he gave me have a cannelure and I always thought they came from Kranks.
-
Joe Pugh
- Posts: 206
- Joined: Fri Feb 07, 2014 11:43 am
- Home club or Range: Merthyr Clay shooting, Work at South Wales 2000 Clay ground
- Location: South Wales
- Contact:
Re: 174 grain flat base .311 bullets wanted
Miroku MK38 12G
Browning Maxus 12G
Ruger 10/22 .22
Marlin 1894 .44
Savage model 24 .22/.410
Lee Enfield SMLE 1918 .303
Mauser Gew 98 1916 7.92x57
Springfield 1903 1928 30-06
Mosin Nagant 91/30 1929 7.62x54R
Lost count now
Browning Maxus 12G
Ruger 10/22 .22
Marlin 1894 .44
Savage model 24 .22/.410
Lee Enfield SMLE 1918 .303
Mauser Gew 98 1916 7.92x57
Springfield 1903 1928 30-06
Mosin Nagant 91/30 1929 7.62x54R
Lost count now
-
dromia
- Site Admin
- Posts: 20227
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: 174 grain flat base .311 bullets wanted
Sellier & Bellot use to do them 180gn, the current catalogue just says FMJ so you would need to check with them to see if they are still flat based.
I lucked onto 50,000 pulled MKVII ball a few years ago thinking that would see me out but I'm down to my last few thousand now, funny how you go through things when you have a progressive and plenty of components on hand.
I lucked onto 50,000 pulled MKVII ball a few years ago thinking that would see me out but I'm down to my last few thousand now, funny how you go through things when you have a progressive and plenty of components on hand.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
ColinR
Re: 174 grain flat base .311 bullets wanted
B E S Do a 180 grain flat base. I bought some a couple of months ago. Great service too
Who is online
Users browsing this forum: No registered users and 6 guests