High Tower Armoury 90/22 stock (FN P90 clone) for Ruger10/22

[Blackstuff]

Hello all,

I know there's a couple of them floating about with forum members, I'm just wondering if anyone knows where they can be sourced other than from Brownells?

http://www.brownells.co.uk/epages/UK.sf ... /100015471

I know Suffolk Rifle Co were supposed to have them in but I can't find them on their website if they do have them. I actually put my name down for the original batch that was coming over but I didn't hear anything from them

Basically I'm looking to put together a readily suppressed .22lr semi. I think I've changed my mind about trying to get a sound moderator on my HK/Walther MP5 (Don't know why they don't have the SD6 model with a working sound mod??). I've always loved the P90 so I'm thinking about going this route. I've got a half memory of someone on here saying that Overpaa had fitted theirs with a Wildcat Whisper sound mod? Now that would be beautiful!!

[safetyfirst]

Ovenpaa did mine, he fitted a 12" ruger target barrel and made a spacer for the barrel to allow the mod threads to lock up as the mod meets the end of the stock. Excellent job.

I got my kit from Phoenix services. A member here.

[Brookers]

Mine came via a mate in the states as at that time HTA did not have an export licence. That might have changed now. I would try them direct.

Hth

Brookers

[Morph]

Mine came via a mate in the states as at that time HTA did not have an export licence. That might have changed now. I would try them direct.

Hth

Brookers

Same here, I got one of the 1st batch sent over by a forum friend in the states (labelled up as an airsoft stock )

[ovenpaa]

The trigger linkage is rather grim as standard however with some imagination it can be significantly improved. I might even have a picture of what I did :)

[Blackstuff]

Any more info/pictures would be most appreciated! Thanks for the replies.

I've emailed the company direct and i'll let you know what they say as its quite a difference in price! (Even with the slump against the dollar!)

[CDM5]

I spoke to Blackmorevale guns last week about this.

Quoted £302 inc VAT

[safetyfirst]

I wouldn't have bought mine if I hadn't picked up a 10/22 for £100 as a donor. Once you've had some trigger work done it's a lovely rifle!

[ovenpaa]

This is the only picture I could find, diameter is just under 16,0mm and you need to get the final diameter just right to allow the trigger to re-set with the absolute minimum of creep and flop. I would say it is a step change over the original offering.

[ovenpaa]

There is a bit more about the HTA bushing and barrel work here:

http://shootingshed.co.uk/wp/2016/01/rimfires/