Reloading the 22-250 H4895 v IMR4895
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Reloading the 22-250 H4895 v IMR4895
Has anyone have any experience of IMR4895 versus H4895 with 50 grain projectiles and the 22-250?
Re: Reloading the 22-250 H4895 v IMR4895
No experience with it in this calibre. If it's what you have on the shelf, then give it a go. If you're looking to specifically obtain a powder for .22-250, then H380 would be my go to propellant.
There's no reason why IMR4895 wouldn't work, it's a very versatile powder.
There's no reason why IMR4895 wouldn't work, it's a very versatile powder.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: Reloading the 22-250 H4895 v IMR4895
I have the usual suspects, H4895, Varget, TR140/RS50, N140 plus a load of stuff either side however I do have nearly a tub of IMR4895 as well and I would much sooner test with powders I have. Only possible downside is temperature stability, H4895 has seemed OK in the past, not so sure about IMR4895.
Re: Reloading the 22-250 H4895 v IMR4895
I'd go ahead and give the IMR4895 a go.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
Duey
- Posts: 343
- Joined: Thu Feb 11, 2016 6:33 pm
- Home club or Range: Offas Dyke, Pickering, North Cotes Butts and Grove small arms
- Location: Brookenby, Lincolnshire
Re: Reloading the 22-250 H4895 v IMR4895
Ovenpaa
I have a part tub of H380 I can drop over Saturday morning if your interested in trying it out
Duey
I have a part tub of H380 I can drop over Saturday morning if your interested in trying it out
Duey
Re: Reloading the 22-250 H4895 v IMR4895
If I could cadge a little bit of you to test with that would be great and we should be in most of the day 
Re: Reloading the 22-250 H4895 v IMR4895
Many thanks for the powder Duey, I am going to sit down towards the end of the week and build some test rounds with a variety of powders including H380 and see how they group and what sort of MV's they give.
-
Duey
- Posts: 343
- Joined: Thu Feb 11, 2016 6:33 pm
- Home club or Range: Offas Dyke, Pickering, North Cotes Butts and Grove small arms
- Location: Brookenby, Lincolnshire
Re: Reloading the 22-250 H4895 v IMR4895
No probs
I have also found a part tub of varget ( which I used to great effect with 52grainers) that your welcom to try out as well and if that turns out to be best suited I also have a full unopened tub we can do a deal on if your interested
Duey
I have also found a part tub of varget ( which I used to great effect with 52grainers) that your welcom to try out as well and if that turns out to be best suited I also have a full unopened tub we can do a deal on if your interested
Duey
Re: Reloading the 22-250 H4895 v IMR4895
I have a tub and a half of Varget here however it will not last forever.
Who is online
Users browsing this forum: No registered users and 8 guests