FAC condition

Anything shooting related including law and procedure questions.

Moderator: dromia

Forum rules
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
Post Reply
Message
Author
Duey
Posts: 343
Joined: Thu Feb 11, 2016 6:33 pm
Home club or Range: Offas Dyke, Pickering, North Cotes Butts and Grove small arms
Location: Brookenby, Lincolnshire

FAC condition

#1 Post by Duey »

Hi all

I have a 308 slot available on my ticket,and at the moment I'm having a look for an inexpensive range rifle.
Quite a few I have looked at are classified as 7.62 so would I be able to buy one of these against my 308 slot, or would I need to go through the hassle of getting the allowance changed to 308/7.62

Cheers
Duey
User avatar
dromia
Site Admin
Posts: 20238
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: FAC condition

#2 Post by dromia »

Best to check with your firearms certification department see how they view it.

Some dealers will put a 7.62 on a 308 slot and vice versa, some won't.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
snayperskaya
Posts: 7234
Joined: Fri Oct 04, 2013 6:43 pm
Home club or Range: West Bank of the Volga.....
Location: West of The Urals
Contact:

Re: FAC condition

#3 Post by snayperskaya »

dromia wrote:Best to check with your firearms certification department see how they view it.

Some dealers will put a 7.62 on a 308 slot and vice versa, some won't.
Seems as though there is a lot of variation depending on which force you are under, West Mercia won't allow a 7.62x54r or 7.62x39 on a .308/7.62 slot for example.It seems they prefer the actual calibre/chambering rather than just the caliber.
"The only real power comes out of a long rifle." - Joseph Stalin

Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.

More than a vested interest in 7.62x54r!
Duey
Posts: 343
Joined: Thu Feb 11, 2016 6:33 pm
Home club or Range: Offas Dyke, Pickering, North Cotes Butts and Grove small arms
Location: Brookenby, Lincolnshire

Re: FAC condition

#4 Post by Duey »

I was thinking I was heading into the lottery of interpretation of guidance when I asked the question
Looks like a call to the FLD to see how they see it

Cheers
nearly there

Re: FAC condition

#5 Post by nearly there »

snayperskaya wrote:
dromia wrote:Best to check with your firearms certification department see how they view it.

Some dealers will put a 7.62 on a 308 slot and vice versa, some won't.
Seems as though there is a lot of variation depending on which force you are under, West Mercia won't allow a 7.62x54r or 7.62x39 on a .308/7.62 slot for example.It seems they prefer the actual calibre/chambering rather than just the caliber.
I was told the same by police Scotland
Rockhopper
Posts: 912
Joined: Mon Nov 09, 2015 2:36 pm
Contact:

Re: FAC condition

#6 Post by Rockhopper »

My ticket came back with 7.62 bolt action rifle on it (plus 7.62 ammunition) which in theory meant I could buy a 7.62x51 or a Mosin although I didn't test this out! A dealer I spoke to said he wouldn't sell me .308 ammunition though. When I applied for an additional .22 rifle I asked for them to change it to 7.62/.308 which they did with no dramas.
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: FAC condition

#7 Post by ovenpaa »

Bedfordshire usually give you .308/7,62x51 and Lincolnshire did the same with some prompting...
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
Activ8

Re: FAC condition

#8 Post by Activ8 »

GMP told me I had to have .308/7.62 on my licence for both rifle & ammo. So that's what I did, in my variation I've put .224/5.56 for both too.
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests