Component prices - taking the p***!
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Component prices - taking the p***!
Just bought myself a rifle in 7mm Rem Mag and popped into a well known dealers near Glasgow for some components. I intended to buy some Large Rifle Magnum Primers, 139gr Hornady SSTs and some powder to work out my first load. Something to create a benchmark with.
Now I'll readily admit to being an infrequent reloader in comparison to many here but I nearly fainted when he slapped 1000 CCI magnum primers down and demanded £64! He started whining about the recession, them being a special order item and other crap when I challenged him, but I essentially told him what he could do with them and left without buying anything.
In your experience, what's a fair price for these primers?
Now that I need to source others and they can't be posted, can i get by with regular Large Rifle Primers?
Thanks
Now I'll readily admit to being an infrequent reloader in comparison to many here but I nearly fainted when he slapped 1000 CCI magnum primers down and demanded £64! He started whining about the recession, them being a special order item and other crap when I challenged him, but I essentially told him what he could do with them and left without buying anything.
In your experience, what's a fair price for these primers?
Now that I need to source others and they can't be posted, can i get by with regular Large Rifle Primers?
Thanks
Re: Component prices - taking the p***!
About 45 / 1000 seems to be about the going rate - did he order them in just for you? He's possibly added the shipping on to the price to you?
Re: Component prices - taking the p***!
Nope. I was there to pick up the stainless moderator I had just bought from him.
Re: Component prices - taking the p***!
Scotsgun,
Blu
Aye you can though it depends on what powder and bullet you are going to use. I have a couple of magnum rifles and the loads I use for them allow regular large rifle primers. With the SST's you should be fine. I use either Federal Match Primers or CCI Benchrest primers.Now that I need to source others and they can't be posted, can i get by with regular Large Rifle Primers?
Blu

Re: Component prices - taking the p***!
Na, he's about 20 quid over the top.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: Component prices - taking the p***!
Jeez I thought I was hard done by, a 1000 CCI primers at my local shop costs just under £20 and I've been complaining about that price. Couple of years back I could have bought the same primers for around $15 which at today's exchange rate is just under £10. Believe it or not all these prices have nothing to do with Obama or the anti's causing panic buying and driving up prices, the prices always stabilize after a while after that BS.
Blu
Blu

Re: Component prices - taking the p***!
Blu wrote:Jeez I thought I was hard done by, a 1000 CCI primers at my local shop costs just under £20 and I've been complaining about that price. Couple of years back I could have bought the same primers for around $15 which at today's exchange rate is just under £10. Believe it or not all these prices have nothing to do with Obama or the anti's causing panic buying and driving up prices, the prices always stabilize after a while after that BS.
Blu
You do know, don't you, that sometimes, every now and again, we really don't like you....

In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: Component prices - taking the p***!
You can get primers by post from Siarm ,they work out at 22-50 per thousand plus shipping from Europe about 15 Euro's.
http://www.siarm.com/product_info.php?c ... cts_id=954
http://www.siarm.com/index.php?cPath=2_ ... 238b195758
http://www.siarm.com/product_info.php?c ... cts_id=954
http://www.siarm.com/index.php?cPath=2_ ... 238b195758
Re: Component prices - taking the p***!
Just looked at the Henry Krank 2013/2014 retail price list....
CCI Large Rifle Magnum; £38.50 per 1000
Remington Large R|ifle Magnum; £36.50 per 1000
Standard primers £4 per 1000 cheaper.
CCI Large Rifle Magnum; £38.50 per 1000
Remington Large R|ifle Magnum; £36.50 per 1000
Standard primers £4 per 1000 cheaper.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: Component prices - taking the p***!
SimG.
Blu
I got big shoulders, I can deal with thatYou do know, don't you, that sometimes, every now and again, we really don't like you....:lol: :55:

Blu

Who is online
Users browsing this forum: No registered users and 9 guests