Who has one? Considering build quality, function, ease of use.......how would you rate it and would you recommend it?
http://www.hornady.com/store/Ammunition ... city-Tool/
Cheers
Hornady Ammunition Concentricity Tool
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Matt
Re: Hornady Ammunition Concentricity Tool
I use one and found it pretty good, easy to use and pretty accurate although it can take a bit of time getting the hang of correcting the run out using the crude but usable screw adjuster. (thought this might damage the bullets at first but as long as your using a light crimp or neck tension only it seems fine)
Using my lee bullet seater and wobbly old lee turret press (waiting for my new press to turn up) it seems to gauge the run out well and its quick to both use and adjust (depending on how good your press and dies are I suppose - mine are pretty naff but still load reasonable well depending on how much movement there was when seating the bullet - hence the new press and new dies)
I think worth the money overall and its proved a useful addition to my loading bench
Hope this helps
Using my lee bullet seater and wobbly old lee turret press (waiting for my new press to turn up) it seems to gauge the run out well and its quick to both use and adjust (depending on how good your press and dies are I suppose - mine are pretty naff but still load reasonable well depending on how much movement there was when seating the bullet - hence the new press and new dies)
I think worth the money overall and its proved a useful addition to my loading bench
Hope this helps
Who is online
Users browsing this forum: No registered users and 2 guests