Harrels re loading press

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Harrels re loading press

#1 Post by Alpha1 »

Any body had any experience with the Harrel press. I need some thing to fasten to my computer desk for neck sizing. Neck expanding and seating bullets while I build maps in UDK.(Unreal Developer's Kit) Nothing to do with shooting but it floats my boat as much as the reloading thing.
John MH

Re: Harrels re loading press

#2 Post by John MH »

No issues with mine, very portable and good for use at the range.
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 4 guests