00 gauge mould

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
hobbesy
Posts: 630
Joined: Sat Jan 05, 2013 7:56 pm
Contact:

00 gauge mould

#1 Post by hobbesy »

Ive just bought a 2nd hand mould and the guy who owned it before covered it in wd40. So the question is how to degrease it?
S&W M&P 15-22
Stoeger Sec 1
Adler a110 Sec 1
Winchester 94 .357,
Marlin 45-70
Savage 10 FP-SR .223
AI AE .308
.357 Westlake Alpha

Have slots open for.....
.22 LB pistol
.22LR rifle
saddler

Re: 00 gauge mould

#2 Post by saddler »

dry cleaning fluid
brake cleaner
alcohol wipes
fairy liquid
wipe it dry with your lasses wedding dress

many possible options

Your Google-fu is weak, grasshopper!!

http://www.lmgtfy.com/?q=how+do+I+get+r ... 40+residue
hobbesy
Posts: 630
Joined: Sat Jan 05, 2013 7:56 pm
Contact:

Re: 00 gauge mould

#3 Post by hobbesy »

'Your Google-fu is weak, grasshopper!!'

It isn't weak but I need to hit thirty posts to post in the wanted section
S&W M&P 15-22
Stoeger Sec 1
Adler a110 Sec 1
Winchester 94 .357,
Marlin 45-70
Savage 10 FP-SR .223
AI AE .308
.357 Westlake Alpha

Have slots open for.....
.22 LB pistol
.22LR rifle
hobbesy
Posts: 630
Joined: Sat Jan 05, 2013 7:56 pm
Contact:

Re: 00 gauge mould

#4 Post by hobbesy »

Hasn't fairy liquid got salt in it?
S&W M&P 15-22
Stoeger Sec 1
Adler a110 Sec 1
Winchester 94 .357,
Marlin 45-70
Savage 10 FP-SR .223
AI AE .308
.357 Westlake Alpha

Have slots open for.....
.22 LB pistol
.22LR rifle
User avatar
dromia
Site Admin
Posts: 20224
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: 00 gauge mould

#5 Post by dromia »

hobbesy wrote:
It isn't weak but I need to hit thirty posts to post in the wanted section

You don't get it do you?

That isn't in the spirit of the forum, we like members to come here first and foremost to contribute to a shooting related discussion not just clock enough posts to get access to the wanted/for sale section.

If that is our only interest here then perhaps some other forums might suit your needs better.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
hobbesy
Posts: 630
Joined: Sat Jan 05, 2013 7:56 pm
Contact:

Re: 00 gauge mould

#6 Post by hobbesy »

dromia wrote:
hobbesy wrote:
It isn't weak but I need to hit thirty posts to post in the wanted section
signfunnypost

You don't get it do you?

That isn't in the spirit of the forum, we like members to come here first and foremost to contribute to a shooting related discussion not just clock enough posts to get access to the wanted/for sale section.

If that is our only interest here then perhaps some other forums might suit your needs better.
It was a joke, ask Sim G sometimes I'm actually semi humorous
S&W M&P 15-22
Stoeger Sec 1
Adler a110 Sec 1
Winchester 94 .357,
Marlin 45-70
Savage 10 FP-SR .223
AI AE .308
.357 Westlake Alpha

Have slots open for.....
.22 LB pistol
.22LR rifle
User avatar
dromia
Site Admin
Posts: 20224
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: 00 gauge mould

#7 Post by dromia »

If that is the case then you should have used the emoticons at the time, not retrospectively.

Your intention is one thing your failure to convey it is what comes over on the forum.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: 00 gauge mould

#8 Post by Alpha1 »

Ive just bought a 2nd hand mould and the guy who owned it before covered it in wd40. So the question is how to degrease it?
WD40 IS A DE GREASER.

Edited by dromia
User avatar
Sim G
Posts: 10752
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

Re: 00 gauge mould

#9 Post by Sim G »

Whoa, hang on a minute, gents, hobbesy is one of the good guys!

Yes, he is semi humorous, but yes, sometimes his delivery is wanting!

He's new to the shooting sports, but not to shooting. Previously a soldier who has seen active service and now a senior fire fighter who on a daily basis, does the sort of stuff that many on here would never have the stomach for! He has the enquiring mind of a five year old and will ask more questions than you can imagine, he's here because I've told him if he can't find it here, then it dosn't exist.

And trust me, he is not the sort of person you want to be shouting "NUMB NUT" to......

So please, should he miss an emoticon, just give him the benefit of the doubt. Should he ask an SFO (state the f**** obvious), then show him patience. I have invited him into "our place" and expect him to be treated with the same respect that all are. Except by saddler, because he really is just rude..... (no emoticon!)
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
User avatar
dromia
Site Admin
Posts: 20224
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: 00 gauge mould

#10 Post by dromia »

Sim G wrote: So please, should he miss an emoticon, just give him the benefit of the doubt. Should he ask an SFO (state the f**** obvious), then show him patience. I have invited him into "our place" and expect him to be treated with the same respect that all are. Except by saddler, because he really is just rude..... (no emoticon!)
If that was the only issue then I would have more sympathy Simon. I take as I find.

If you or hobbsey wish to discuss this further then PM's are the way.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests