Case ID

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Dave 101

Case ID

#1 Post by Dave 101 »

Could anyone ID a case for me it is made of aluminium I think , ,I scrapped the neck of the case and its not plated , unless zinc is very soft and light in weight , its a 5.56 cal 84 which iam guessing is 1984 and SF.


Thanks Dave
saddler

Re: Case ID

#2 Post by saddler »

Image
Dave 101

Re: Case ID

#3 Post by Dave 101 »

Here you go if you need a picy .

Image
Dougan

Re: Case ID

#4 Post by Dougan »

Hi Dave,

I like to collect odd cases too (the only aluminium one I have is Russian), so though I'd have look - if you put '5.56 aluminium case sf' into google, there is a little info...possibly a French military training round, used with plastic bullets..?
Dave 101

Re: Case ID

#5 Post by Dave 101 »

Dougan wrote:Hi Dave,

I like to collect odd cases too (the only aluminium one I have is Russian), so though I'd have look - if you put '5.56 aluminium case sf' into google, there is a little info...possibly a French military training round, used with plastic bullets..?
Looks like you are correct Dougan , I found them on the range yesterday , 25 yd indoors , safe to use if they are a training round . Your more than welcome to have these if you want them , I will have another look round next Sunday and see if theres any more about .
I dont collect , I just pick up what looks intersting and scrap them I picked up a Mauser 7.63 a couple of weeks ago . Its for the Mauser C96 Broomhandle pistol , we have a Hertitage section so odd items turn up from time to time .

Dave
Dougan

Re: Case ID

#6 Post by Dougan »

Dave 101 wrote:
Dougan wrote:Hi Dave,

I like to collect odd cases too (the only aluminium one I have is Russian), so though I'd have look - if you put '5.56 aluminium case sf' into google, there is a little info...possibly a French military training round, used with plastic bullets..?
Looks like you are correct Dougan , I found them on the range yesterday , 25 yd indoors , safe to use if they are a training round . Your more than welcome to have these if you want them , I will have another look round next Sunday and see if theres any more about .
I dont collect , I just pick up what looks intersting and scrap them I picked up a Mauser 7.63 a couple of weeks ago . Its for the Mauser C96 Broomhandle pistol , we have a Hertitage section so odd items turn up from time to time .

Dave
That's a very kind offer Dave, and one I can't say no to :cheers: - if you don't want them yourself, then anything unusual you find I would happily pay for the postage (+ beer :grin: ) ...I'll PM you...
Dougan

Re: Case ID

#7 Post by Dougan »

OK, as we're IDing cases....

Here's some of the 'odds and sods' from my meager collection:
cases.JPG
heads.JPG

Some questions:

The .303 blank in the middle - it doesn't look like a standard blank...is for something else like launching...?

The rimless .22 on the right - This I can't find anything about...is says 'Rem' on the head (so Remington), but has no rim at all...?

Quiz:

Easy one - what's the thing at the front?

Not so easy - The 9mm on the left...what environment would you be most likely to find this one in, in the UK...?
Dave 101

Re: Case ID

#8 Post by Dave 101 »

The .303 case could be for grenade launching from a No. 4
The 9mm looks like it could be a frangiable cartridge , used by sky marshalls on aircraft .
A flechette from a shotgun cartridge .

Dave
Dougan

Re: Case ID

#9 Post by Dougan »

Dave 101 wrote:The .303 case could be for grenade launching from a No. 4
The 9mm looks like it could be a frangiable cartridge , used by sky marshalls on aircraft .
A flechette from a shotgun cartridge .

Dave
Someone else said that about the .303 :good:

Yes, a flechette :good: ....didn't know it was from a shotgun though....

And the 9mm - no, something else....
User avatar
pe4king
Posts: 1402
Joined: Sat Nov 06, 2010 9:59 pm
Home club or Range: Lydd Rifle Club.
Location: Rainham, Kent.
Contact:

Re: Case ID

#10 Post by pe4king »

The 9mm on the left is a blank, used in semi and full auto weapons.
What is a Sapper? This versatile genius condenses the whole system of military engineering and all that is useful and practical. He is a man of all work of the Army and the public ready to do anything or go anywhere, in short, he is a Sapper.
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests