I know its going to be tricky getting this figure as my bullets will be different, but its worth a try!
I currently use Lapua Scenar 155gr & 167gr and also Hornady A-Max 155gr & 168gr. Both with Lapua Bass.
I'm wanting to get some loads ready for when my rifle is available next weekend but could do with an idea of OAL. Loads etc are sorted, just the OAL required.
Cheers
Toby
Howa 1500 .308 OAL?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Howa 1500 .308 OAL?
Arghhh!!! too many variables. You could go for the safe option of 2.800" or slit the neck of a case so the bullet is a fairly firm sliding fit and chamber it to measure, or get the shop to measure it for you before you pick it up. Or beg/borrow/steal an OAL gauge.
EDIT 2.800" is for the 155 Scenar's
EDIT 2.800" is for the 155 Scenar's
-
TobyH
Re: Howa 1500 .308 OAL?
I've got the gauge, just not the rifle! Hence the request. Perhaps I just need to be a bit more patient and measure it myself!!
I'm like a child waiting for xmas day!!!
I'm like a child waiting for xmas day!!!
-
Robin128
Re: Howa 1500 .308 OAL?
Distance to the lands needs to be consistent after working up which distance is more accurate, ST magazine dimensions...no good working up such a round if it will not feed thru mag you wish to use.
I use a Stoney Point measure.
Rob
I use a Stoney Point measure.
Rob
Re: Howa 1500 .308 OAL?
Just dip the case into a bucket of powder and then level it off at the top of the neck.
Then hammer the bullet in compressing the powder until it won’t go in any more.
Then crimp it as hard as you can so that it would take a Sumo wrestler with a set of mole-grips to remove it.
And there you are …………..PERFICK !!!!!!!!!!
Yes I am joking………….honestly.
:lol:
G.M.
Then hammer the bullet in compressing the powder until it won’t go in any more.
Then crimp it as hard as you can so that it would take a Sumo wrestler with a set of mole-grips to remove it.
And there you are …………..PERFICK !!!!!!!!!!
Yes I am joking………….honestly.
:lol: G.M.
Never argue with an idiot, he will drag you down to his level and beat you with experience.
Who is online
Users browsing this forum: Majestic-12 [Bot] and 2 guests