I am currently in the process of building my reloading bench ready for when I start reloading in my man cave / bunker. Its my intention to get a RCBS rock chucker supreme kit but I have not actually got the kit yet (still saving my sheckles).
Under the bench I am building some strong wooden supports for the bolts but without the actual press I need to know exactly what the distance is from the lip of the press that sits on the worktop to the center of the mounting bolt(s). Can anybody with an RCBS rock chucker please give me the dimensions as per the pic.
Many thanks.
MikeyB
RCBS Rock Chucker dimensional question
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: RCBS Rock Chucker dimensional question
Try an get it next to a vertical/upright support as well to keep deflection to a minimum.
-
DOGGER2UK
Who is online
Users browsing this forum: Bing [Bot] and 8 guests