Ovenpaa, Could you post name if you manage to find out thanks.ovenpaa wrote:There is a company that makes after market barrels for Blaser, Sako and Schultz & Larsen, for some reason I think they are Norwegian but I could be wrong, they are very distinctive in that they have a red finish. Down side is I cannot think of the company name.
Reloading data for Blaser Lrs2
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
ranger4
Re: Reloading data for Blaser Lrs2
Re: Reloading data for Blaser Lrs2
Found it, the company I was thinking of is http://www.vapensmia.no/ however I cannot see any reference to the Blaser on the site. I have mailed someone I know in Norway to see if they can help any.
-
ranger4
Re: Reloading data for Blaser Lrs2
Many thanks for Info Ovenpaa, Would be great if they could make a 30in 7mm Heavy profile barrel for f class for the blaser.ovenpaa wrote:Found it, the company I was thinking of is http://www.vapensmia.no/ however I cannot see any reference to the Blaser on the site. I have mailed someone I know in Norway to see if they can help any.
Who is online
Users browsing this forum: No registered users and 7 guests