Brass/bullets - wish lists?

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
JD4570

Brass/bullets - wish lists?

#1 Post by JD4570 »

As posted under Vendors and Innovators on here, I am starting up a reloading supplies business this summer. The idea is to try and improve supplies a little bit and do so at reasonable cost for people.

The shop's already running in a kind of Lite version, where people can e-mail me and arrange to buy stuff by PayPal. However, I aim to have a proper online store going by the end of summer.

I'll be starting off with a small selection of imported bullets and brass in the common calibres. After that, well it's up to you lot really...

Which is where I need your help. If you'd like to respond, may I point you to this thread: Wish lists please!

Thanks for your help,

Jon ;)
JD4570

Re: Brass/bullets - wish lists?

#2 Post by JD4570 »

For those interested, please see latest post on the above thread, as I'm now starting to prepare an order...
Post Reply

Who is online

Users browsing this forum: pigsy and 8 guests