Case Lube

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
Dangermouse

Re: Case Lube

#31 Post by Dangermouse »

The 4x2 that I was referring to is the cleaning cloth roll that is cut into patches for cleaning barrels and possibly a lot more. Have I called it the wrong name, I am known for mixing my names up. I just put it in there as I did not want water getting into the cases and I did not have a "ink pad" as most other lubes use,

DM
Top
User avatar
kennyc
Posts: 2340
Joined: Wed Jul 20, 2011 11:21 pm
Home club or Range: hunters NRPC
Location: Reading West Berks
Contact:
Contact kennyc

Re: Case Lube

#32 Post by kennyc »

no worries, I knew it was me being dense :oops: thanks for the tip :good:
Top
Blu

Re: Case Lube

#33 Post by Blu »

DM: Nope you got the 4X2 thing right.

Blu :twisted:
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 5 guests