tikka t3 varmint 1 in 12

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
20series
Full-Bore UK Supporter
Posts: 4941
Joined: Mon Nov 08, 2010 10:42 am
Home club or Range: Oundle R&PC
Location: Chelveston, Northants
Contact:

Re: tikka t3 varmint 1 in 12

#11 Post by 20series »

onelesscharlie wrote:Perhaps I will try increasing the OAL in .005 increments and see what happens.
Thanks again for you help.

Colin
thats what I did with my 308 and was amazed at the difference playing with the jump made :shakeshout:

cheers
Alan
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools!!
Douglas Adams, 1952-2001 RIP
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests