8x58RD Brass & bullet source found
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: 8x58RD Brass & bullet source found
I'll pass as well. I've managed to source some 8x56R Pvi ammunition so I'm sorted for the time being. Cheers.
“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
Re: 8x58RD Brass & bullet source found
Thats three pass's now David, thanks for your efforts anyway
Jim
Jim
Re: 8x58RD Brass & bullet source found
At that price I would be very surprised if anyone said yes please, these are from the country that made the brass and everyone tells me there is no real demand for it so to ask DKK20/case is bordering on extortion, especially based on how much we paid for the rifle in the first place.
Just a thought, if anyone wants the right headstamp on a few cases then let me know and I will pick up some extra factory ammunition, so at least you get it at once fired brass. It will certainly not be two quid a case either!
Just a thought, if anyone wants the right headstamp on a few cases then let me know and I will pick up some extra factory ammunition, so at least you get it at once fired brass. It will certainly not be two quid a case either!
Who is online
Users browsing this forum: No registered users and 4 guests