QuickLoad overview

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

QuickLoad overview

#1 Post by ovenpaa »

I have used QL for a few years now starting with 3.0 and currently 3.3 and there are a couple of bits in this video I found very interesting even after all this time. Well worth a watch.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
EagerNoSkill

Re: QuickLoad overview

#2 Post by EagerNoSkill »

Dave u evil besterd ****

Still looking for my copy have a £20 bounty on it for the kid that finds it

So I want tom play with QL and I cant
EagerNoSkill

Re: QuickLoad overview

#3 Post by EagerNoSkill »

It has been found - now up to my eyebrows in User Manual and gobblediegook :-P

fun to see what happens when you replace PISTOL powder for the same charge of RIFLE powder :shock:
nicklm

Re: QuickLoad overview

#4 Post by nicklm »

I found an interesting glitch on this a while ago, if you change to coated bullets and then back again, certain values change, can't remember precisely which ones now and don't have it on my work laptop. But still a very useful tool.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests