Recommend me a calibre ........

Anything shooting related including law and procedure questions.

Moderator: dromia

Forum rules
Should your post be in Grumpy Old Men? This area is for general shooting related posts only please.
Message
Author
Scotsgun

Re: Recommend me a calibre ........

#11 Post by Scotsgun »

spud wrote:should be ok i would have thought if not go for the 6x47
I was thinking of something similar; 6XC.

Any calibre will be considered if its at least legal for roe. For roe deer, the bullet must weigh at least 50 grains AND have a minimum muzzle velocity of 2,450 feet per second AND a minimum muzzle energy of 1,000 foot pounds.
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Recommend me a calibre ........

#12 Post by ovenpaa »

What about 6mmBR? I am always impressed by just how accurate that thing is, would that scrape in?
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
User avatar
Sandgroper
Full-Bore UK Supporter
Posts: 4735
Joined: Sat Nov 06, 2010 3:45 pm
Location: Stanley, Falkland Islands
Contact:

Re: Recommend me a calibre ........

#13 Post by Sandgroper »

There are a lot of cartirdges to choose from. I suppose it depends on how different you want and how much you want to spend?

I guess the most cost effective choice would be the 22-250AI as you can fire form with standard 22-250 ammunition.

This looks interesting http://www.6mmbr.com/30BR.html but for deer, bullet choice would paramount to avoid too much meat damage (but you already know that :oops:.) I've used 125gn Nosler BT with good effect on Roe from my 308. So given the design parameters of the 30BR, it might be a good choice to start with.

HTH
“The standard you walk past is the standard you accept.”

Lieutenant General David Morrison

I plink, therefore I shoot.
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Recommend me a calibre ........

#14 Post by ovenpaa »

It is unfortunate you cannot shoot 22-6,5x47 as it is tremendously accurate round with an 80 grain SMK and quite capable to any distance you choose to shoot,
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
User avatar
Sandgroper
Full-Bore UK Supporter
Posts: 4735
Joined: Sat Nov 06, 2010 3:45 pm
Location: Stanley, Falkland Islands
Contact:

Re: Recommend me a calibre ........

#15 Post by Sandgroper »

ovenpaa wrote:It is unfortunate you cannot shoot 22-6,5x47 as it is tremendously accurate round with an 80 grain SMK and quite capable to any distance you choose to shoot,
True, but he could use the 75gn Swift Scirocco as it's designed for hunting or there's a couple 70gn bullets from Barnes, as well.

Edit: In Scotland a 22 centre fire is legal as long as it meets the parameters Scotsgun specified.
“The standard you walk past is the standard you accept.”

Lieutenant General David Morrison

I plink, therefore I shoot.
User avatar
Sim G
Posts: 10752
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

Re: Recommend me a calibre ........

#16 Post by Sim G »

I'm with saddler, 7mm-08 Rem. Bullets from 120gn to 168 with a fast twist. Stacks of load data and can give superb accuracy which it has a reputation for.

I'm a big fan. I have one.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
Scotsgun

Re: Recommend me a calibre ........

#17 Post by Scotsgun »

Sim G wrote:I'm with saddler, 7mm-08 Rem............. I have one.
So do I. Sorry, i should have replied to saddler's post. I currently have the following rifles which are also 'open' for deer stalking (and vermin):

308
7mm-08
25-06
270
22-250
223

I've never really bothered the AI calibres. Is there a significant advantage over the original e.g. 6.5x55AI over 6.5x55 ?
User avatar
Sandgroper
Full-Bore UK Supporter
Posts: 4735
Joined: Sat Nov 06, 2010 3:45 pm
Location: Stanley, Falkland Islands
Contact:

Re: Recommend me a calibre ........

#18 Post by Sandgroper »

Scotsgun wrote:
Sim G wrote:I'm with saddler, 7mm-08 Rem............. I have one.
So do I. Sorry, i should have replied to saddler's post. I currently have the following rifles which are also 'open' for deer stalking (and vermin):

308
7mm-08
25-06
270
22-250
223

I've never really bothered the AI calibres. Is there a significant advantage over the original e.g. 6.5x55AI over 6.5x55 ?
In all honesty, it looks like all your bases are covered for hunting in Scotland (or the UK for that matter). I really can't think of anything that would be an improvement over anything in that list. If I was in your position, I'd be looking at an older wildcat that's possibly fallen out of favour (e.g. 6mm Remington) or something really new - just for the hell of it!
“The standard you walk past is the standard you accept.”

Lieutenant General David Morrison

I plink, therefore I shoot.
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Recommend me a calibre ........

#19 Post by ovenpaa »

With the availability of 22-250 brass in Lapua now you could always rechamber for a heavier bullet which still keeps you as a 22-250. I still rate the 22-6,5x47 which is what the Viking shoots to great effect (30mm group at 650 yards earlier this year) I also like the idea of the old wildcats.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
Scotsgun

Re: Recommend me a calibre ........

#20 Post by Scotsgun »

Ovenpaa, is there a decent site reviewing and covering reloading the calibre?
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests