Loading 6.5 x 55

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Dougan

Re: Loading 6.5 x 55

#11 Post by Dougan »

ovenpaa wrote:They are probably S&B's then so might be copper washed steel over lead, test them with a magnet!
Oh!..thanks for the warning - I will ask before buying - I thought £9.95 was a bit too cheap...he has some for £18.95 (same a what the .303s were) aswell which may be better....
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Loading 6.5 x 55

#12 Post by ovenpaa »

I picked up 500 of his 147 grain NATO type .308's and they are great out to 600m with some SP9 behind them, I am down to the last handful now.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
The trakker

Re: Loading 6.5 x 55

#13 Post by The trakker »

Vit 160 with 42 gr . 139/140 heads, magicccccc :)
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 6 guests