.303 cost - I thought reloading was CHEAPER!!

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Dougan

Re: .303 cost - I thought reloading was CHEAPER!!

#21 Post by Dougan »

dromia wrote:
Dougan wrote:
simong wrote:Pardon the iggerence !

Having only ever loaded 174 FMJBT ( ex Kranks) what options are there with the dreaded cast boolits ? How much can I tell the missus that I have saved ( always a source of brownie points :shifty: !) ?

Seriously though folks...... As the world is getting more expensive, any savings to allow more bangs would be welcome :lol:

ttn

the greek
Enfeild No 5, patented ear wax remover
Hi Simong :)

I found this link posted by Dromia a while back: http://www.full-bore.co.uk/viewtopic.php?f=36&t=810


Also some questions to all please:

Other than cost, would there be any advantages to using cast boolits in an SMLE? Or any disadvantages?

In the link above, it quotes a load for a .303 170-180 grn boolit giving 1500-1600 fps - the powder is Hercules, which I know nothing of...what would be the equivilent in Vhit N140? or other Vhit powder?

What are the velocity limitations with .303 cast boolits? (I think I understand the gas checked thing :-P )

Advantages - easier to get a boolit to suit your rifle than a condom off the shelf one, you are in charge of quality control so ultimately greater accuracy. Cheaper. Another facet of reloading, boolit casters are the only handloaders who come near to making their own ammunition. A greater understanding of your rifle and its ballistics internal and external

Hercules is now Alliant. 2400 = VV N 110 or 120.

Velocity limitations, none if you get good boolit fit and a not too hard, malleable alloy
I've still got some more questions about the 'dark arts' - but I'll be seeing you Sunday...so I can ask you then :good:
Dougan

Re: .303 cost - I thought reloading was CHEAPER!!

#22 Post by Dougan »

Going back to the subject of cost....

I've loaded 100 rounds of .303 for the weekend, and I reckon it's cost me £25 (not including cases), and 5 hours of time. This has saved me over £40 - which will cover my club range fee on the Saturday, and my comp fees for the Trafalgar :good:
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests