Hi
I regularly use my Wamadet press for hand loading ammo I have all the bits required to use it for sizing cast bullets but I don,t know how they go together on the press. Has any one ever used a Wamadet for sizing cast bullets if so how do you set it up.
Wamadet press bullet sizing help required.
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
bewildered
- Posts: 100
- Joined: Tue Apr 22, 2014 10:51 am
- Home club or Range: Pinewood
- Contact:
Re: Wamadet press bullet sizing help required.
I have sized many bullets on my trusty Wamadet, it really is a clever piece of kit. Also swaged a few as well but that is hard work. I could show you how to set it up but unfortunately trying to explain how to do it would I'm sure confuse you even more. I live in Reading and if you are anywhere near here I will be pleased to demonstrate when we can meet again. I will also try to find the original instructions and see if they shed any light on the subject.
Re: Wamadet press bullet sizing help required.
Thanks I wonder why I didn't follow up in the original thread. Strange.
Re: Wamadet press bullet sizing help required.
I have been reading the instructions I did not realize they could be used for bullet swaging.
Thanks again.
Thanks again.
Who is online
Users browsing this forum: No registered users and 5 guests