Anschutz 1417

[Mattylad]

Hi everyone, I am new to the forum so please be gentle.

I am having a bit of trouble with my trusty Anschutz 1417 rimfire. The rifle is about 8 years old but has not had a great deal of use as I only really use it in summer. This year it has started to occasionally not eject empty casings. I have stripped the gun down and cleaned everything and reassembled with a little bit of light oil with only a marginal improvement. I am using Winchester ammo as I have always done without any issues until now.
I was wondering if anyone with a bit more experience might be able to suggest a remedy please?

Many thanks.

[MotorRacingBruce1980]

Check the rim thickness on the ammo your using. Might sound strange but my Anschutz is fussy on ejecting if the Rim thickness is slightly thinner (admittedly mine is a single extractor model).

If yours is a twin extractor are they worn or even round the correct way? That might not be the case with your Anschutz but on my CZ the Extractors are handed.

[Les]

Make sure that the "ejector recess" in the barrel is totally clear .... the ejector might be struggling to actually get in far enough to collect the empty case.

As Bruce has said, make sure the ejector itself is OK, too, and not rounded etc etc.

[Mattylad]

Thanks for the input, I will check the above.