After 20 years and thousands of rounds, my original Lee hand prime broke. Got a new one a year ago or so, and it's sh1t! Thinking of replacing it with a RCBS hand prime, but the question is for anyone that's got one... Can my existing shell holders, either Lee autoprime or Lee universal, be used on the RCBS hand prime or is it a case that I'll have to buy a wagon load of tool specific shell holders as well?
Thanks.
RCBS hand prime
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
RCBS hand prime
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
Furiouspilgrim
Re: RCBS hand prime
The newer RCBS hand primer has a self adjusting holder if I’m not mistaken. No need for separate shellholders
-
Mauserbill
- Full-Bore UK Supporter
- Posts: 1204
- Joined: Thu Jun 22, 2017 4:49 pm
- Home club or Range: Range
- Contact:
Re: RCBS hand prime
Have to agree with you regarding Lee hand primer they improved the original round one and made it worse !
-
AlieN
Re: RCBS hand prime
RCBS have a hand primer called the "RCBS Universal Hand Priming Tool" (see http://rcbs.com/Products/Priming/Tools/ ... -Tool.aspx). This eliminates the need for shell holders at all and I've found it very good (though I have limited experience with alternatives). You do have to mess about with it a bit to convert between large primer seating and small primer seating though.
My usual online retailers (McAvoy Guns, Dauntsey Guns and Sportsman Gun Centre) all stock it.
AlieN
My usual online retailers (McAvoy Guns, Dauntsey Guns and Sportsman Gun Centre) all stock it.
AlieN
Who is online
Users browsing this forum: No registered users and 5 guests