The discussion is about the capability of the ammunition, which is usually ascertained by it's vertical dispersion thus eliminating spread due to wind and conditions and any lack of perfection in reading them by the shooter.Racalman wrote:Although ...
The TR V bull is 14.4 inches diameter, and OnTarget makes your group 1MOA.
Redding type s bushing full sizing die - advice please
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Redding type s bushing full sizing die - advice please
-
Racalman
- Full-Bore UK Supporter
- Posts: 731
- Joined: Tue Mar 11, 2014 8:21 am
- Home club or Range: LPSC and NRA
- Location: Berkshire
- Contact:
Re: Redding type s bushing full sizing die - advice please
Just sorted out some online image hosting, so here are my most recent recorded 1,000 yard groups shot in October during load development.
This was before I worked out how to reduce the marker size and turn off the numbers!
The wind was around 6mph.
This was before I worked out how to reduce the marker size and turn off the numbers!
The wind was around 6mph.
-
meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: Redding type s bushing full sizing die - advice please
See: even the green paint splodged onto the tip of each bullet to show where it landed hasn't affected the accuracy...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Who is online
Users browsing this forum: No registered users and 5 guests